Oct. 27, 2023
main technical parameters
1) motor power:N=7.5KW, n=960rpm
2) Speed of the knife dish: n=31-161rpm,4gears
3) Range of materials used: Pipe outside diameter: Dr=Ø159-Ø800mm
wall thickness : 10-150mm
4) Angle adjustment range of tool rest:0-35°
5) Feeding speed:0; 0.10; 0.25mm/r 3gears
6) frequency control axial movement speed:50-400mm/r
Axial movement distance:300mm
7) Beveling type:single v; double v; U and etc.
8) knife dish diameter:D=850mm
9) Machine height: H=1140mm
10) Machine weight: G=5500Kg.
technical requirements
1) With M20 anchor bolts
2) The depth of the foundation is determined by soil bearing capacity. The depth is 500mm when the soil bearing capacity is 8T/㎡. If the ground endurance is insufficient or more than 8T/㎡, the depth should be adjusted accordingly.
3) The foundation is 200# concrete reinforced concrete,250# fine stone concrete is poured in the reserved hole.
